Step 5 - Separators
(or 'Spacers')
- Moving on to the separator menu we should first of all check the 'enable separators' box, and in our case,
uncheck the 'show separator text'. We have no offsets and no inactive image. The Menu Separator values should
be set to 'bitmap' with a left/right tile setting of 22 again (again, ignore the colour pickers).
(Note - We could have chosen to use a line or a double line as our separator. I would use the line in preference to a
bitmap if I was using a single button stretched over the whole menu with the 'to menu' option checked in the
'Menu Button' dialog.)
- Had we used the text settings, we could have set the values for font, colour,
alignment and offset. The actual text is set in the Menu Editor dialog. We can leave these as our spacers don't have any text.
|
|
|